Motor MAN D2862LE476 pentru MAN D2862LE476
Hörsching7279 km to "United States/Columbus"
Dacă ați decis achiziționarea echipamentului la un preț mic, trebuie să fiți sigur că persoana cu care comunicați este un vânzător real. Aflați toate informațiile disponibile cu privire la proprietarul echipamentului. O metodă de înșelăciune este aceea de a se prezenta ca o societate existentă în mod real. În caz de îndoială, vă rugăm să luați legătura cu noi prin formularul de feedback, pentru alte controale.
Înainte de a decide o achiziție, examinați cu atenție diferite oferte de vânzare pentru a cunoaște costul mediu al modelului ales. Dacă prețul din oferta care vă place este mult mai mic față de alte oferte asemănătoare, gândiți-vă bine. O diferență de preț importantă poate indica defecte ascunse sau o tentativă a vânzătorului de a comite o înșelăciune.
Nu cumpărați produse care au prețuri mult diferite față de prețul mediu al altor produse asemănătoare
Nu dați acordul la plata unor cauțiuni suspecte sau plăți anticipate ale mărfurilor. În caz de îndoieli, clarificați amănuntele, solicitați mai multe fotografii și documente privind mașina, verificați autenticitatea documentelor, puneți întrebări.
Cel mai răspândit tip de înșelăciune. Vânzătorii necinstiți pot cere o anumită sumă din avans, pentru ”rezervarea” dreptului de achiziționare a mijlocului. În acest mod ei strâng o mare sumă de bani, după care dispar, fără a putea fi contactați.
- Transferul plății anticipate pe card
- Nu efectuați plata anticipată fără semnarea documentelor care să ateste procesul de transfer de bani, dacă în timpul tratativei vânzătorul are îndoieli.
- Transfer în contul ”curatorului”
- O astfel de solicitare trebuie să vă alarmeze, foarte probabil comunicați cu o persoană care urmărește să vă înșele.
- Transferul în contul societății cu un nume asemănător
- Atenție, persoanele rău intenționate se pot ascunde în spatele unor societăți renumite, aducând mici modificări numelui societății. Nu efectuați transfer de bani dacă numele societății este dubios.
- Înlocuirea propriilor date în factura societății reale
- Înainte de efectua transferul de bani, vă rugăm să verificați corectitudinea datelor bancare și dacă acestea aparțin societății indicate.
Contactează vânzătorul
+358 50 53...
Arată
+358 50 5345498
+358 9 231...
Arată
+358 9 23165797
Austria 
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor