Новый заливщик швов TICAB Crack Sealer Machine / Asphalt Crack Fill Machine, Manufacturer

Crack sealing machine is designed for heating and pouring bitumen-Elastoplast sealing mastic.
Used in the performance of work on the sealing of cracks, seams and waterproofing, repair and construction works on the roads.
BPM500 is a crack sealer designed for heating and pouring the bitumen sealant for repair and construction works on highways, airfields, parking lots, bridges.
Crack is a seam filler designed for heating and supplying under pressure bitumen-Elastoplast sealing mastic during the work on sealing cracks, seams and waterproofing for repair and construction works on highways, airfields, bridges, overpasses.
The main element of the filler is the heated container. The mastic is heated to the operating temperature by a diesel burner through an oil jacket filled with thermal oil. The hot mastic is fed through a supply hose and a fishing rod.
The caster is equipped with a single-cylinder diesel engine.
A system for electrically heating the mastic supply hose and the casting nozzle of the fishing rod is provided for continuously maintaining the working temperature of the material.
Options:
Mixer with horizontal paddles.
Electrically heated hose.
Autonomous diesel generator Konner & Sohnen KS (Germany)/Lombardini (Italy).
Hydraulic drive.
Self-propelled.
Additional options:
Hot Air Lance.
Characteristics:
Capacity: 500 l.
Generator type: diesel.
Heating method: indirect.
Burner power: 130 Kw.
Hose length: 4m.
The mastic temperature at which the burner is automatically switched off is 180 °C.
Thermal oil temperature at which the burner is automatically switched off is 200 °C.
Heating time for mastic: no longer than 2 hours.
Bitumen gear pump: exterior.
Max work temperature: 200°C.
Electrical accessories:
Diesel burner Ecoflam (Italy).
Controller.
Compressor Metabo (Germany).
Hot lance.

TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Çatlak Dolgu Makinası BPM-500, bitüm-elastomerik mastiklerin ısıtılması ve dökülmesi için tasarlanmıştır.
Yollarda çatlak, dikiş ve su yalıtımı, onarım ve inşaat işlerinde kullanılır.

Dolaylı bir yöntemle dizel brülörle ısıtma
Basınç altında ısıtılmış mastik temini
Otomatik sıcaklık kontrolü
Besleme hortumu için elektrikli ısıtma sistemi
Tank - 500 litre.
Motor - tek silindirli dizel
Çatlakları ve dikişleri üflemek ve ısıtmak için kompresör ve sıcak boru
Müşterinin talebi üzerine treyler üzerine kurulum
Özellikler
Tank hacmi 500 l
Motor - Lombardini jeneratör, güç kW (hp) Dizel, 14
Kompresör: alıcı - 50 l kapasite 400 l / dak

ısıtma yöntemi
Dizel brülör Ecoflam İtalya
Isıtıcı gücü 50 kW
Brüt ağırlık 1300 kg
Teslimat hortumu uzunluğu 6 m
Dizel brülörlü termal yağ ile mastik ısıtma
Çalışma sıcaklığı 120° -190°C
Servis personeli 2 kişi
Yakıt deposu hacmi 50 l
Yağ tankı hacmi 30 l
Mastiği 2 saatten fazla termal yağ ile ısıtmak
Dizel motor