Линия розлива Tetra Pak® Heuft Tetra Alblend 10 - T

Type of Machine: Processing plant, bottle forming, filling, closing and packing line
Capacity (Units): 36.000 bottles / hour for 0,4 and 0,5 liter bottles and 18.000 bottles / hour for 1,5 liter bottles
Packaging: 0,4 / 0,5 and 1,5 liter bottles
Product: Ice tea (soft drinks)
Screw cap opening type: Tethered caps 38 mm
Available per: October 2026
Electric: 400 V - 3 Ph - 50 Hz
Marke: Tetra Pak - Sidel - Zalkin - Krones - Heuft
​Complete aseptic line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005
has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer
pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps)
filler
CIP modules for processing and filler
4 cameras full bottles inspector (360 degrees)
accumulation table
labeling machines (roll on and sleever) packer
palletizer and stretch wrapper. General:Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap)Material of the bottle / Compesition: PETBottle closed with a snap capCapacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/hProduct: Ice tea (softdrink)Scope of Supply:1. Mixing plantManufacturer: Tetra PakModel/type: Alblend 10 2S FBYear of manufacturing: 2005Serial number: T5842850029Mixer with a mixing ratio range: 1:2 – 1:52. PasteurizerManufacturer: Tetra PakModel/type: Tetra Aseptic Drink 100 / TA Drink 100Year of manufacturing: 2005Serial number: T5841110569Pasteurizer with tubular heat exchanger
heat recovery
intermediate primary heating agent (steam / hot water/ product) and intermediate cooling agent (water with propylene glycol/treated water/product)a. There are 2 capacities
depending on the bottle size: 18.000 l/h and 27.000 l/hb. Pasteurization temperature: currently running on 94-96 °C holding time between 20 and 40 seconds
realized by configuration of holding tubes.c. Inlet temperature: 20 °C – outlet temperature 30 °C - 35 °Cd. Efficient vacuum deaeration system with dearator – DO for output product with 3. Sterile buffer tankManufacturer: HolvriekaModel/type: Tetra Alsafe HA20000Year of manufacturing: 2005Serial number: T5841610066Volume: 21.264 litersJacketedTemperature 0 / 148 °CPressure: -1 / 3,5 BarIncluding steam barriers and N2 head space.4. Blow molding machines (2 pieces)Manufacturer: SidelModel/type: SBO 12 Serie 2+Year of manufacturing: 2005Serial numbers: 5607 and 5608Capacity: 18,000 bottles / hour each. Upgraded with new preform chain design
pre-blowing and blowing block valve optimized in 2025.Bottle moulds are excluded !!5. Caps feeder Manufacturer: SidelModel/type: Cap Feeder 20246. Conveyors1. Air conveyors (Sidel) between blowers and filler2. Bottle accumulation table and conveyors3. Pallet conveyors7. Empty bottles inspectors and caps inspectorsManufacturer: Presco Technology IncModel/type: Intellispec 4.0.012Year of manufacturing: 2005Serial number: 6627Digital cameras (2 pieces)8. Aseptic fillerManufacturer: SidelModel/type: SF ASPT FMi 70/20CYear of manufacturing: 2005Serial number: 3042Decontamination areas for bottles and caps and 70 filling vales with sterile design. Change parts for 0,4L
0,5L and 1,5L bottles. Filling speed: a. 36.000 bottles / hour for 0,4 and 0,5 liter bottles.b. 18.000 bottles / hour for 1,5 liter bottles.9. Aseptic NitrodoserManufacturer: VBSLiquid N2 dosing system with sterilization module10. Capper (aseptic)Manufacturer: ZalkinModel/type: I20/720Year of manufacturing: 2005Serial number: 6169Upgraded for tethered caps 38 mm11. Data coder Manufacturer: Videojet (ink) Tradability connection – communication with filler PLC12. Full bottle inspector (filling level and caps) Manufacturer: HeuftModel/type: SpectrumII VX CAPYear of manufacturing: 2025Serial number: 25G10693413. Roll on labeling machine Manufacturer: KronesModel/type: ContirollYear of manufacturing: 2012Serial number: K810831Speed: 42.000 bottles / hour14. Sleever labeling machine with inspector and steam ovenManufacturer: KronesModel/type: Sleevematic TS1Year of manufacturing: 2017Serial number: K815004Speed: 42.000 bottles / hourAutomatic sleeve feeding system with a magazine of 6 sleeve reels and automatic change
including bufferLabeling inspectorSleeve steam oven15. PackerManufacturer: ZambelliModel/type: LFT 60 CSYear of manufacturing: 2005Serial number: 166615445Capacity: 3.000 packs / hour Upgraded in 2025 (film feeding and cutting system and software)16. Palletizer Manufacturer: Sidel / CermexModel/type: P422.20Year of manufacturing: 2005Serial number: 3575517. Stretch wrapper Manufacturer: Robopac Model/type: HELIX HS 40Year of manufacturing: 2005Serial number: 305040132Upgraded in 2015Additional features:Bottle moulds for the blowers are excluded !!All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak.​Over the years
all main electronic components are upgraded and updated according to the OEM
based on availability on the market and latest modelsLine general condition is very good. Can be seen in production by serious interest.Line will be available in October 2026. Dismantling will be done by a local company on request of the Seller. Costs for the dismantling are for the new buyer